Search Results for "PTFE crd held"

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

Bodies with and without weld fittings.

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

Remove the two screws from the left side of power supply and discard.

The following precautions should be taken when welding a CW Series Check Valve with tube extensions or butt weld ends into a system.

• ZH
• ES
• FR
• RU
• DE
• EN

XS Series Excess Flow Valve Service Instructions

• ES
• FR
• RU
• DE
• EN

Loosen locking screw by turning counter clockwise; Slide hex wrench down into adjusting screw; Turn both screws clockwise to increase cracking pressure, counter-clockwise to decrease.

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

Welding should be done by qualified personnel as outlined in Section IX of the ASME Boiler Code. Weld filler material should be the same as the base material.

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

Loosen bonnet locking screw with 1/16 in. hex wrench; Loosen handle set screw with 1/8 in. hex wrench and remove handle.

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

DL Series, DS Series, Service Instructions

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

This instruction is for the installation of and setting of a NPN normally closed electronic-actuator sensor on DP or ALD3/ALD6 series diaphragm valves.