搜索“PTFE crd hábiles”的结果

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

Bodies with and without weld fittings.

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

Remove the two screws from the left side of power supply and discard.

The following precautions should be taken when welding a CW Series Check Valve with tube extensions or butt weld ends into a system.

• ZH
• ES
• FR
• RU
• DE
• EN

XS Series Excess Flow Valve Service Instructions

• ES
• FR
• RU
• DE
• EN

Loosen locking screw by turning counter clockwise; Slide hex wrench down into adjusting screw; Turn both screws clockwise to increase cracking pressure, counter-clockwise to decrease.

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

Welding should be done by qualified personnel as outlined in Section IX of the ASME Boiler Code. Weld filler material should be the same as the base material.

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

Loosen bonnet locking screw with 1/16 in. hex wrench; Loosen handle set screw with 1/8 in. hex wrench and remove handle.

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

DL Series, DS Series, Service Instructions

• ZH
• ES
• FR
• RU
• JA
• DE
• EN

Remove three (3) Capscrews from Cylinder Cap (9/64 in. hex wrench) and remove Cap; Remove Spring(s) - “1C” model only; Unscrew Bonnet Nut (1 in. open-end wrench).

• ZH
• FR
• RU
• JA
• EN