text.skipToContent text.skipToNavigation
圧力計、汎用圧力計(ECE R110認証)、PGNシリーズ

Swagelok®圧力計、汎用圧力計(ECE R110認証)(PGNシリーズ)

圧縮天然ガス(CNG)自動車アプリケーションにおいて、ECE R110認証の圧力計を使用すると、正確な圧力測定を行うことができます。

圧力計について問い合わせる

Swagelok®汎用圧力計 PGNシリーズは、ECE R110認証を取得しており、圧縮 天然ガス(CNG)自動車での使用に適しています。ポリカーボネイト製レンズを採用して保護の強化を図ることで、過酷な環境下での耐久性を実現しています。

目盛板の外径サイズは50 mmおよび63 mmで、目盛範囲は0~40 MPaです。オリフィスのサイズは0.58 mmです。

ブルドン管付きの真ちゅう製エンド・コネクション[50 mm目盛板圧力計(モデル50のみ)、トランスデューサー出力(真ちゅう製エンド・コネクションの50 mm目盛板の圧力計の場合)、校正証明書、材料証明書などのオプションがあります。

目盛範囲 圧力計:0~40 MPa
エンド・コネクション
50 mm目盛板
ステンレス鋼製エンド・コネクション・タイプ(サイズ)
  • フル・スケールの1.6 %(JIS B7505の1.6級、ASME B40.1グレードB、EN 837-1 クラス1.6)
  • Swagelok®チューブ・アダプター(1/4 インチ、6 mm)
  • NPTおねじ(1/4 インチ)
  • G1/4B(EN、1/4 インチ)
真ちゅう製エンド・コネクション・タイプ(サイズ)
  • 50 mm目盛板のみ、フル・スケールの2.5%(JIS B7505の2.5級、ASME B40.1グレードB、EN 837-1 クラス2.5)
  • NPTおねじ(1/4 インチ)
  • G1/4B(EN、1/4 インチ)
63 mm目盛板
ステンレス鋼製エンド・コネクション・タイプ(サイズ)
  • Swagelokチューブ・アダプター(1/4 インチ、6 mm)
  • NPTおねじ(1/4 インチ)
  • G1/4B(EN、1/4 インチ)

問題を識別して圧力計の不具合を防止する

圧力計のカタログ

構成部品とその材質、使用圧力、使用温度、オプション、アクセサリーなど、製品に関する詳細情報につきましては、以下の資料をご参照ください。

Swagelok PrESS(Pre-Engineered Subsystem)

小さなフットプリント(設置面積)ながら大きな影響力を持つ圧力計の不具合を検出する方法

今回は、圧力計の不具合の兆候を認識し、作業員へのリスクと修理費用がかさむダウンタイムを回避する方法を紹介します。

圧力計の不具合を防止するには

関連資料/コラム記事

A Swagelok tube fitting is installed
Common Causes and Costs of Fluid System Leaks

Fluid system leaks are a common occurrence in most plants. Learn how and why leaks occur, how to locate and test for them, and ultimately how to develop a strategy to address and reduce leaks plantwide.

Green Alternative Systems Manufacturing Starts at Swagelok Through Custom Solutions
Green Alternative Systems Manufacturing Starts at Swagelok Through Custom Solutions

Learn how collaboration with Swagelok helped Green Alternative Systems accelerate production, lower labor costs, and achieve greater system reliability.

Engineer inspects small bore fluid systems on custom assembly
How Fluid System Fabrication can Alleviate Resource Constraints

There are several common fluid systems that successful plant operations depend on, and choosing the right fabrication provider can be highly beneficial if you’re short on resources.

Workers discuss process measurement in a plant
Process Measurement – Impulse Line Best Practices

It can be difficult to identify issues within your process instrumentation application if you focus solely on the transmitter. Learn how to solve problems within your process instrumentation line with tips and best practices from Swagelok.

This process may take several minutes. Please be patient and remain on the page.