不锈钢苛刻环境型联合阀帽针阀， 2.4 Cv，1/2 in. PSW，球形阀杆，Grafoil 填料

工作压力高达 10 000 psig (689 bar); 使用 PTFE 填料时，温度范围可从 –53 至 232°C (–65 至 450°F)； 使用 Grafoil® 填料时，温度可高达 648°C (1200°F); 316 不锈钢；合金 400、20、600 和 C-276 以及钛材料

Features: Step-by-step identification procedure for threads and end connections.

成套件内容PTFE 填料，UHMWPE 填料

This document specifies guidelines used by Swagelok® Company and its suppliers to ensure compliance with product cleanliness requirements as stated in ASTM G93 Level C. Application of the document is limited to wetted system components. This document must be used in conjunction with product catalogs, technical bulletins, and reports.

特点：限制对手动执行阀的使用；；锁定附件符合 OSHA 锁定/挂牌，Standard 29 CFR Part 1910.147，危险能源控制锁定；亮橙安全色可以提高能见度。也提供其它颜色。

Swagelok® Specification SC-10 defines the cleaning, lubrication, assembly, and packaging requirements for standard Swagelok products and describes practices used to meet these requirements.

Valve sizing often is described by the nominal size of the end connections, but a more important measure is the flow that the valve can provide. And determining flow through a valve can be simple.

Pages 1-3. Features: installation in high-pressure applications and high safety-factor systems.

Welding should be done by qualified personnel as outlined in Section IX of the ASME Boiler Code. Weld filler material should be the same as the base material.

Procedure for installing Swagelok tube fittings in sizes over 1 inch or 25 mm.