ステンレス鋼製一体型40シリーズ3方タイプ・ボール・バルブ、4.6 Cv、1/2 インチ・サイズSwagelokチューブ継手、ライブ・ロード式

开关，切换，交叉转换式流动路径; 工作压力达 3000 psig (206 bar); 温度范围从 –53 至 148°C (–65 至 300°F); 环境和加热过程应用; 1/16 至 3/4 in. 和 3 至 12 mm 端接.

Features: Swagelok® electric actuators can be used to control the position of many Swagelok ball valves; alternating- and direct-current models are available. An electrical signal is used to change valve position from remote locations. Integral limit switches provide an output signal of the valve position, even between positions.

Note orientation of the directional handle. Bar handle must be installed pointing in the same direction as the removed handle; Loosen set screw; Remove current handle. Also remove the handle stop insert when applicable.

This valve is adjusted for factory testing at 1000 psig (68.9 bar) nitrogen or the rated pressure if lower than 1000 psig (68.9 bar).

If the valve handle is removed, please note its orientation; When reinstalled, the handle must be in the same orientation.

特点：限制对手动执行阀的使用；；锁定附件符合 OSHA 锁定/挂牌，Standard 29 CFR Part 1910.147，危险能源控制锁定；亮橙安全色可以提高能见度。也提供其它颜色。

This document contains instructions for replacing a standard valve handle with a latch/lock handle on the following 3-way ball valves:

140溝죗든땡獵契포40G溝죗、40溝죗鹿섟SK溝죗랫쳔

40G, 40, 60, 83, H83 和 SK 系列球阀AFS 球阀 ■ 计算阀门操作扭矩 ■ 选择执行机构及相关部件 ■ 选择安装支架成套件