Stainless Steel 1-Piece 40G Series Ball Valve, 2.4 Cv, 1/4 in. Male Swagelok VCO O-ring Seal Fitting

开关，切换，交叉转换式流动路径; 工作压力达 3000 psig (206 bar); 温度范围从 –53 至 148°C (–65 至 300°F); 环境和加热过程应用; 1/16 至 3/4 in. 和 3 至 12 mm 端接.

40G, 40, 60, 83, H83 和 SK 系列球阀AFS 球阀 ■ 计算阀门操作扭矩 ■ 选择执行机构及相关部件 ■ 选择安装支架成套件

特点：限制对手动执行阀的使用；；锁定附件符合 OSHA 锁定/挂牌，Standard 29 CFR Part 1910.147，危险能源控制锁定；亮橙安全色可以提高能见度。也提供其它颜色。

MPC 系列：符合 ANSI/ISA 76.00.02 的设计，38.2 mm（1.5 in. 平台）；易于配置、装配和维护；阀门、过滤器、流量计、调压阀和压力表，以及用于附加表面安装元件的转换接头

特点：齿条齿轮气动执行机构、电磁阀和限位开关；符合 ISO 5211 标准的气动执行机构、电磁阀、限位开关和位置传感器；可用于现场装配的完整执行组件和成套件

锁定支架套件; 所需工具.

This valve is adjusted for factory testing at 1000 psig (68.9 bar) nitrogen or the rated pressure if lower than 1000 psig (68.9 bar).

Mounting Instructions for ISO 5211 Actuator to 40G Series, 40 Series, 83 Series, AFS Valves, SK Series Valves

140溝죗든땡獵契포40G溝죗、40溝죗鹿섟SK溝죗랫쳔

Note orientation of the directional handle. Bar handle must be installed pointing in the same direction as the removed handle; Loosen set screw; Remove current handle. Also remove the handle stop insert when applicable.

If the valve handle is removed, please note its orientation; When reinstalled, the handle must be in the same orientation.

This document contains instructions for replacing a standard valve handle with a latch/lock handle on the following 3-way ball valves:

本体不带有焊接接头; 本体带有焊接接头.