Search Results for "from"

Leave valve in the open position; Loosen and remove the eight body bolts from the center body; Remove center body from between the flange ends; Remove and discard the flange seals and seat subassemblies from both sides of the center body.

• ZH
• JA
• EN

A Swagelok changeover (SCO) is a special type of primary gas control system, pre-engineered for applications where the continuous supply of gas is critical. Accomplished through staggered set points of two pressure regulators, the SCO will switch from a primary to a secondary source of gas when the ...

• ZH
• ES
• FR
• RU
• DE
• EN

Remove the two screws from the left side of power supply and discard.

While holding the fitting body steady, tighten the plug onequarter turn from the finger-tight position.

• RU
• JA
• EN

Open the valve; Remove the body fastener from the “C” location on the swing-away side of the valve; Loosen the remaining body fasteners.

• ZH
• ES
• FR
• JA
• DE
• EN

Remove snap ring from bottom of plug using snap ring pliers. Remove plug/handle subassembly by lifting straight up on handle.

Features: Remove plug at top of the handle, Loosen the screw and remove the handle, Multiposition handle - remove the positioner from the flanges by using a screwdriver as a lever.

• JA
• EN

This “60E” Series Ball Valve contains several component parts with materials different from those found in the standard “60T” Series Ball Valve.

• RU
• EN

Remove the inlet pressure to the solenoid; Disconnect the plug-in wire assembly and the tubing from the solenoid push‑to‑connect fitting (push the collar towards the fitting and pull the tubing).